Imaging of Buried Archaeological Materials: The Reflection Properties of Archaeological Wood   总被引：1，自引：0，他引：1  

Stephanie H.L. Arnott  Justin K. Dix  Angus I. Best  David J. Gregory 《Marine Geophysical Researches》2005,26(2-4):135-144

Effective marine archaeological site management demands detailed information on not only the spatial distribution of artefacts but also the degradation state of the materials present. Although sonar methods have frequently been used in an attempt to detect buried wooden shipwrecks they are currently unable to indicate their degradation state. To assess the sensitivity of acoustic measurements to changes in the degradation state of such material, and hence the potential for sonars to quantify degradation, laboratory measurements of compressional wave velocity, as well as bulk density for oak and pine samples, in varying states of decay, were undertaken. These data enabled the calculation of theoretical reflection coefficients for such materials buried in various marine sediments. As wood degrades, the reflection coefficients become more negative, resulting in the hypothesis that the more degraded wood becomes, the easier it should be to detect. Typical reflection coefficients of the order of −0.43 and −0.52 for the most degraded oak and pine samples in sand are predicted. Conversely, for wood exposed to seawater the predicted reflection coefficients are large and positive for undegraded material (0.35 for oak, 0.18 for pine) and decrease to zero or slightly below for the most degraded samples. This indicates that exposed timbers, when heavily degraded, can be acoustically transparent and so undetectable by acoustic methods. Corroboration of these experimental results was provided through comparison with high resolution seismic reflection data that has been acquired over two shipwrecks.  相似文献   

新型波浪采集系统平台设计     

刘世萱  王孝坤  牟长青 《海洋技术学报》2004,23(2):90-92

主要介绍了新型波浪采集系统的设计思想与主要参数，采集、存储、运算和电源控制部分的结构与组成，以及各部分的特点和关键技术。  相似文献   

Variations in wave direction estimated using first and second order Fourier coefficients     

V. Sanil Kumar  N. M. Anand 《Ocean Engineering》2004,31(17-18):2105-2119

In most design applications such as alignment of the berthing structure and breakwater alignment, it becomes necessary to determine the direction of design wave. There are two different approaches to determine wave direction. One involves the use of first order Fourier coefficients (mean wave direction) while the other uses second order Fourier coefficients (principal wave direction). Both the average wave direction over the entire frequency range (0.03–0.58 Hz) and the direction corresponding to the peak frequency are used in practice. In the present study, comparison is made on wave directions estimated based on first and second order Fourier coefficients using data collected at four locations in the west and east coasts of India. Study shows that at all locations, the mean and principal wave directions for frequencies ranging from 0.07 to 0.25 Hz (±0.5 times peak frequency) co-vary with a correlation coefficient of 0.99 but at lower and higher frequencies, difference between the parameters is large. Average difference between the mean wave direction at peak frequency and the average over the frequency related to spectral energy more than 20% of maximum value is less, around 13°. Study shows that average difference in the sea and swell directions is around 39°.  相似文献   

Dynamic analysis of a vertical plate exposed to breaking wave impact     

M. Salih Kirkgoz  A. Kamil Tanrikulu  Cengiz Dündar 《Ocean Engineering》2004,31(13):2308-1635

From the experimental studies in recent years, it has become known that when a wave breaks directly on a vertical faced coastal structure, high magnitude impact pressures are produced. The theoretical and experimental studies show that the dynamic response of such structures under wave impact loading is closely dependent on the magnitude and duration of the load history. The dynamic analysis and design of a coastal structure can be succeeded provided the design load history for the wave impact is available. Since these types of data are very scarce, it is much more convenient to follow a method which is based on static analysis for the dynamic design procedure. Therefore, to facilitate the dynamic design of a vertical plate that is exposed to breaking wave impact, a multiplication factor called “dynamic magnification factor” is herein presented which is defined as the ratio of the maximum value of the dynamic response to that found by static analysis. The computational results of the present study show that the dynamic magnification factor is a useful ratio to transfer the results of static analysis to the dynamic design of a coastal plate for the maximum impact pressure conditions of p_max/γH₀≤18.  相似文献   

Freely floating-body simulation by a 2D fully nonlinear numerical wave tank     

Weoncheol Koo  Moo-Hyun Kim 《Ocean Engineering》2004,31(16):221-2046

Nonlinear interactions between large waves and freely floating bodies are investigated by a 2D fully nonlinear numerical wave tank (NWT). The fully nonlinear 2D NWT is developed based on the potential theory, MEL/material-node time-marching approach, and boundary element method (BEM). A robust and stable 4th-order Runge–Kutta fully updated time-integration scheme is used with regriding (every time step) and smoothing (every five steps). A special φ_n-η type numerical beach on the free surface is developed to minimize wave reflection from end-wall and wave maker. The acceleration-potential formulation and direct mode-decomposition method are used for calculating the time derivative of velocity potential. The indirect mode-decomposition method is also independently developed for cross-checking. The present fully nonlinear simulations for a 2D freely floating barge are compared with the corresponding linear results, Nojiri and Murayama’s (Trans. West-Jpn. Soc. Nav. Archit. 51 (1975)) experimental results, and Tanizawa and Minami’s (Abstract for the 6th Symposium on Nonlinear and Free-surface Flow, 1998) fully nonlinear simulation results. It is shown that the fully nonlinear results converge to the corresponding linear results as incident wave heights decrease. A noticeable discrepancy between linear and fully nonlinear simulations is observed near the resonance area, where the second and third harmonic sway forces are even bigger than the first harmonic component causing highly nonlinear features in sway time series. The surprisingly large second harmonic heave forces in short waves are also successfully reproduced. The fully updated time-marching scheme is found to be much more robust than the frozen-coefficient method in fully nonlinear simulations with floating bodies. To compare the role of free-surface and body-surface nonlinearities, the body-nonlinear-only case with linearized free-surface condition was separately developed and simulated.  相似文献   

A method to estimate the forces exerted by internal solitons on cylindrical piles   总被引：1，自引：0，他引：1  

Shuqun Cai  Xiaomin Long  Zijun Gan 《Ocean Engineering》2003,30(5):673-689

Internal soliton is the large amplitude wave existing in the pycnocline, induced by internal tide in the condition of special bottom topography. During its propagation process, the induced disturbance can bring about strong convergence of sea water and sudden strong current (wave-induced-current), which can cause severe threat to the ocean engineering structures, such as oil drilling platform and pipeline. In this paper, Morison’s empirical method, modal separation and regression analyses are introduced to estimate the forces and torques exerted by internal soliton on cylindrical piles. As an example, a limited set of observational data recording a passage of the internal soliton near Dongsha Islands is used to estimate the horizontal velocity and its acceleration in a vertical section for computing the force and torque on a supposed pile, and the estimation results are reasonable. It is shown that, the higher number of the modes retained in the calculation, the better the estimation of velocity profile fits the observational one. A better overall approximation to the real solution can be reached if there are more observational current data acquired in a whole vertical profile.  相似文献   

A note on estimation of the Jacobian elliptic parameter in cnoidal wave theory     

Y. -S. Cho   《Ocean Engineering》2003,30(15):1915-1922

A new and simple calculating technique for the Jacobian elliptic parameter is presented in this study. The technique is very useful in generating a train of cnoidal waves in both laboratory and numerical wave tanks. Upon specification of water depth, the wave height and either the wave period or the wavelength, the proposed technique uses the Newton–Raphson method to estimate the Jacobian elliptic parameter directly, without trial and error procedures or look-up in tables. It is shown that the technique provides equally accurate results as the ad hoc methods previously used.  相似文献   

Dynamic properties of green water event in the overtopping of extreme waves on a fixed dock     

Nobuhito Mori  Daniel T. Cox 《Ocean Engineering》2003,30(16):2021-2052

A statistical model is developed to predict wave overtopping volume and rate of extreme waves on a fixed deck. The probability density function for the volume and rate of overtopping water are formulated based on the truncated Weibull distribution with the assumption of local sinusoidal profile for small amplitude waves. Sensitivity to the wave nonlinearity parameter and deck clearance is discussed. The statistical model is compared to laboratory data of the instantaneous free surface elevation measured in front of a fixed deck, and overtopping volume and overtopping rate measured at the leading edge of the deck. The statistical theory compared well with the measured exceedance probability seaward of the deck. The model prediction of the exceedance probability of deck overtopping gave qualitatively good agreement for large overtopping values.  相似文献   

Modelling of periodic wave transformation in the inner surf zone     

P. Bonneton   《Ocean Engineering》2007,34(10):1459-1471

In this paper, we analyse the ability of the nonlinear shallow-water (NSW) equations to predict wave distortion and energy dissipation of periodic broken waves in the inner surf zone. This analysis is based on the weak-solution theory for conservative equations. We derive a new one-way model, which applies to the transformation of non-reflective periodic broken waves on gently sloping beaches. This model can be useful to develop breaking-wave parameterizations (in particular broken-wave celerity expression) in both time-averaged wave models and time-dependent Boussinesq-type models. We also derive a new wave set-up equation which provides a simple and explicit relation between wave set-up and energy dissipation. Finally, we compare numerical simulations of both, the NSW model and the simplified one-way model, with spilling wave breaking experiments and we find a good agreement.  相似文献   

Drag Coefficient,Dynamic Roughness and Reference Wind Speed     

Paul?A.?HwangEmail author 《Journal of Oceanography》2005,61(3):399-413

Surface waves are the roughness element of the ocean surface. The parameterization of the drag coefficient of the ocean surface is simplified by referencing to wind speed at an elevation proportional to the characteristic wavelength. The dynamic roughness is analytically related to the drag coefficient. Under the assumption of fetch limited wave growth condition, various empirical functions of the dynamic roughness can be converted to equivalent expressions for comparison. For datasets covering a wide range of the dimensionless frequency (inverse wave age), it is important to account for the variable rate of wave development at different wave ages. As a result, the dependence of the Charnock parameter on wave age is nonmonotonic. Finally, the analysis presented here suggests that the significant wave steepness is a sensitive property of the ocean surface and a single variable normalization of the dynamic roughness using a wavelength or wave height parameter actually produces more robust functions than bi-variable normalizations using wave height and wave slope.  相似文献